top of page
Search

Custom Built Single Shot .22 Part 3

  • Oct 1, 2021
  • 1 min read

by Jim (the gunsmith)


In the previous post, I showed how I rough carved a stock from a piece of hard maple. Now we get into fitting the stock and sanding it. Then we’ll begin the process of relief carving and inletting the wood by hand with wire inlays.


The relief carving patter is laid out in pencil.


Let the hand carving fun begin !




 
 
 

Comments


Maine's Premier Firearm Store and Gunsmith
(207) 344-1486

 

©2024 by Coastal Defense Maine

bottom of page